RIGOL M300 - Manual (Page 79)

Chapter 3 Commands Compatibility RIGOL
Programming Guide for DM3000 3-13
[SENSe:]VOLTage[:DC]:IMPedance:AUTO
{ON |1} respond to it.
[SENSe:]VOLTage[:DC]:NPLC? [{MIN|MAX}]
[SENSe:]VOLTage[:DC]:NPLC
{<PLCs>|MIN|MAX|DEF}
Query and set the integral time of DC voltage
measurement. The input value and return value are
both multiples of PLC.
Note: DM3000 only receives the command but
does not support the NPLC value setting function.
[SENSe:]VOLTage[:DC]:NULL[:STATe]?
[SENSe:]VOLTage[:DC]:NULL[:STATe]
{ON|OFF}
Query and set the state of the Null function of DC
voltage measurement.
[SENSe:]VOLTage[:DC]:NULL:VALue?
[{MIN|MAX}]
[SENSe:]VOLTage[:DC]:NULL:VALue
{<value>|MIN|MAX}
Query and set the Null value of DC voltage
measurement.
[SENSe:]VOLTage[:DC]:PEAK:STATe?
[SENSe:]VOLTage[:DC]:PEAK:STATe
{ON|OFF}
Query and set the state of the peak-peak
measurement function of DC voltage measurement.
Note: DM3000 only receives the command but
does not support the peak-peak measurement
function.
[SENSe:]VOLTage[:DC]:RANGe:AUTO?
[SENSe:]VOLTage[:DC]:RANGe:AUTO
<mode>
Query and set the state of the auto range function
of DC voltage measurement.
[SENSe:]VOLTage[:DC]:RANGe[:UPPer]?
[{MIN|MAX}]
[SENSe:]VOLTage[:DC]:RANGe[:UPPer]
{<range>|MIN|MAX|DEF}
Query and set the range of DC voltage
measurement.
[SENSe:]VOLTage[:DC]:RESolution?
[{MIN|MAX}]
[SENSe:]VOLTage[:DC]:RESolution
{<resolution>|MIN|MAX|DEF}
Query and set the reading resolution of DC voltage
measurement.
SAMPle:TIMer? [{MIN|MAX}]
SAMPle:TIMer {<interval>|MIN|MAX}
Query and set the sample interval.
SYSTem:BEEPer:STATe?
SYSTem:BEEPer:STATe <mode> Query and set the state of the beeper.
The range of <mode> is {ON|OFF|1|0}.
SYSTem:BEEPer[:IMMediate]
This command causes the beeper to buzz once.
Note: this command is only effective when the