PLANET VIP-350PT User Manual

Page 117

Advertising
background image

[117/168]

TCP Port

Specify the TCP port number of the registrar server. The default is 5060. Use 0 to disable TCP
signaling.

[Del]

Delete one character

[Back]

Return without any changes.

OK

Save changes and return.

and Move cursor one position in edit mode.



R e

g i

s

t

r

a

r

T

C

P

P

o

r

t

:

[

0 -

6 5 5 3 5

]

5 0 6 0

Del

Back


Auto-Answer

Auto-answer incoming calls arrive on this account (<FROM> header in the initial INVITE message)
in idle mode. By idle, it means the phone-set is either engaging in no calls or putting a call on hold.

If this feature is on, it will play distinguished auditable ring then turn on speaker-phone (or head-set
if applicable) whenever an incoming call arrives on this registered SIP address-of-record account
during idle mode.

[On] / [Off]

Toggle between enable and disable this feature. Show check symbol ‘√’
in-line if enabled!

[Back]

Return without any changes.

OK

Edit selected item.

and Navigate through items.


Í

Note

1. If [DND] is on, Do-Not-Disturb feature wins; otherwise, for All-Calls-Forward

and Auto-Answer features, All-Calls-Forward takes precedence.

2. The IP Phone supports server-side invoked auto-answer feature

(Section-“Auto Answer” on “User’s Manual”) and auto-answer all incoming
calls on idle mode system-wide (section-“Auto-Answer” on this document)

3. All incoming calls will check against the server-side invoked auto-answer

feature first, and then the global auto-answer feature, finally fall to the
account-specific auto-answer feature.

Advertising
This manual is related to the following products: