PLANET VIP-350PT User Manual
Page 41
[41/168]
c. Show display or user-part of its email-like address whenever possible for One-Touch Dial.
Besides, show Show
for “One-Touch Dial”.
d. Otherwise promp to selected menu for further interaction.
The other 8 user-defined keys, excludng those NO-Function keys, will be shown during call state
whenver [DSS] is pressed.
1 . A d
d
r
e
s
s
B
o
o
k
2 . C a
l
l
H
i
s
t
o
r
y
3 √ D T M F
R
e
l
a
y
b
y
I
N F O
4 √ A u
t
o
-
A
n
s
w
e
r
5 .
D N D
6 .
S I
P
D
o
m
a
i
n
S
t
a
t
u s
7 .
F o
r
w a
r
d
Back
1. Show ‘√’ to indicate activation status of “Auto-Answer”, “DND”, “DTMF Relay by
INFO”; and unmap of these features will turn off selected feature as well .
2. “Register”: Show ‘√’ to indicate successfully registered to all active SIP service domains
and a ‘X’ symbol to indicate none of the active domains are registered. No symbols
shown if register to any of the active SIP service domains succeeded.
3. Show display or user-part of its email-like address whenever possible for One-Touch
Dial.
4. Besides, show Show
for “One-Touch Dial”.
5. Otherwise promp to selected menu for further interaction.
DTMF
Specify a sequence of DTMF keys to dial in pre-dial phase or to transmit after call setup. This is
shortcut to transmit a sequence of preconfigured DTMF keys, which aims to facilitate IVR system
interaction. For example, you may configure your personal ID or banking account, and just activate
corresponding DTMF entry to generate those pre-configured DTMF tones whenever appropriate (such
as inquired by tele-banking system). If a DTMF entry is activated during digit-collecting phase, then
those DTMF keys will be collected in a manner identical to those manually pressed by user.
Acceptable keys are [0-9 | * | # | p | ,], where ‘p’ and ‘,’ (comma) stands for one-second pause.
Depending on the configuration, such DTMF sequence may be transmitted to the peer either inbandly
or outbandly (rfc2833 or INFO). You may also configure it to use as server feature access code during
conversation, such as configuring it as “&76”, and it will send DTMF “&76” “as is” during conversation.
Key Function Description
[Dial]
Dial selected DTMF string.
[Add]
Add new DTMF entry.
[Back]
Return to previous page.
【
OK】
Edit selected entry.
【
↑】and【↓】 Scroll list.