Hitachi NJI-350B User Manual
Page 178
Chapter 5 Instruction Specifications
5-128
Notes
• Set the unit number (0 to 3) and slot number (0 to 1) after s+1. For other set values, DER is set to “1” and that slot will not
be processed.
• If there is no I/O assignment to the designated slot, DER is set to “1” and that slot will not be processed.
• If the number of s+n points exceeds the maximum I/O number, DER is set to “1” and no processing will be performed.
• If the number of points exceeds 64, DER is set to “1” and the points exceeding 64 will not be processed (refresh will be
performed for up to 64 points).
Slot location number
The slot locations are designated using the unit number and slot number.
The unit number and slot number are set as follows in one word units:
0 to 0
b12
b15
b7
b3
b0
0 to 0
Unit number
Slot number
FUN 82 (s
)