Xylem IM223 R04 Hydrovar Pump Control - Manual (Page 35)

35
Section 9
note
read and follow the operating instructions carefully before programming to avoid incorrect
settings which will cause drive errors! All programming must be completed by qualified
technicians!
9.1 display – control panel of the Master / single drive
9.2 Function of the push Buttons
▲ Start the HYDROVAR
▼ Stop the HYDROVAR
and Reset: pressing both buttons simultaneously for 5 seconds
▲ Increase a value / selection in the submenu
▼ Decrease a value / selection in the submenu
▲ + short ▼ Scroll slower
▼ + short ▲ Scroll faster
Tap: enter submenu / Next parameter in the menu
Tap: leave submenu / Previous parameter in the menu
Press and hold: Select a specific action
Press and hold: Back to the main menu
proGraMMinG