Part names, Part names -1 – Yokogawa Wireless Temperature Transmitter YTA510 User Manual

Page 8

Advertising
background image

<2. Part Names>

2-1

IM 01C50T02-01E

2. Part Names

Refer to the individual instruction manuals for

detailed descriptions of the parts. This section

describes the topics applicable to the Fieldbus

communication type.
(1) In the Fieldbus communication type, the

amplifier(CPU) assembly consists of two

boards, as shown in Figure 2.1.

(2) In other communication types, there's the pin

switch which is used for selecting the direction

of hardware burnout at the position of 'SW1'

on the amplifier assembly, while Fieldbus

communication type does not have this pin.

(3) The Fieldbus communication type has a

simulation function. A SIMULATE-ENABLE

switch is mounted at 'SW1' on the amplifier.

Refer to Section 6.3, “Simulation Function” for

details of the simulation function.

Simulation

setting switch

Amplifier Assembly

F0201.ai

Figure 2.1

Diagram of the Amplifier Assembly

Advertising
This manual is related to the following products: