Yokogawa YFGW710 - Manual (Page 122)

<C2. Field Wireless Configurator>
C2-1
IM 01W01F01-01EN
C2. Field Wireless Configurator
C2.1 Introduction
C2.1.1 Document Purpose and Intended Users
This chapter describes how to use the Field Wireless Configurator.
This document is intended for users with proper rights to set field wireless networks and Field
Wireless Devices.
C2.1.2 Product Overview
The Field Wireless Configurator is used for performing settings for configuring field wireless net-
works with the YFGW710 Field Wireless Integrated Gateway (hereafter called YFGW710) as the
core of the wireless networks.
Use the Field Wirless Configurator to create the configuration information of the field wireless
networks as a project and set the various functions required for the devices configuring the
networks. At the Project screen, configure and edit settings without connecting the YFGW710
(offline state), and download the configured or edited settings to the concerned YFGW710 and to
the field wireless devices joining the networks.
In addition, to set process data and status data via Modbus/TCP communication to the host sys-
tem or upper devices, data is also allotted to the Modbus register in the project.
FieldMate Provisioning Device Tool in FieldMate reads the data in the field wireless devices and
outputs to the Field Wireless Configurator (provisioning). Then the provisioning data of the field
wireless devices is registered to the YFGW710. Provisioning is the task of setting security infor-
mation and network information required for field wireless devices to join field wireless networks.