Yokogawa YFGW710 - Manual (Page 168)

<C3. Field Wireless Management Tool>
C3-14
IM 01W01F01-01EN
Viewing Options
l
Device Identity
You can identify devices in the Topology window by their device tag, EUI-64 address or short
EUI-64 address (last 4 hexadecimal characters in the address). To display the preferred iden-
tification method, select it from the Use device identity drop-down list. All the devices will be
displayed with the selected identification method, in both the topology graph and the Contracts
section.
In order to better distinguish the backbone router, gateway, and system manager, their short EUI-
64 addresses have been replaced with the abbreviations BBR, GW, and SM, respectively.
l
Links
When the page is opened, the links between devices are not displayed. To view the links for a
particular device, click on the device shown in the previous screen (Figure C3-13). To view all the
links among devices, enable the [Show all links] option at the bottom right corner of the page, as
shown in the screen below (Figure C3-14):
Figure C 3-14
l Zoom In, Zoom Out
The zoom in/zoom out buttons allow you to get a close-up view or a high-level view of the net-
work topology.
Click button to zoom in or button to zoom out.
l
Fullscreen View
The full screen button allows you to maximize the graph window.
Click the button to switch to a fullscreen view. In Fullscreen mode, click [Return] to return to
the normal view.