Yokogawa YFGW710 - Manual (Page 150)

<C2. Field Wireless Configurator>
C2-29
IM 01W01F01-01EN
C2.3.4.3 Delete One or More Devices
1. Perform steps 1, 2 and 3 in C2.3.4.2 and go to the Device tab page.
2. Select the devices to delete in the right pane by clicking while pressing the [CTRL] key.
3. Press in the Devices tab. You will be asked for confirmation;
4. Press the [Yes] button. When devices are successfully deleted, they disappear from the list.
5. Go to menu Tools – Download. The Download Project Data window appears. The required
items on the tree of the Data to download field will be checked.
6. Perform steps 8 and 9 in C2.3.4.2.
C2.3.4.4 Modifying a device
1. Perform steps 1, 2 and 3 of C2.3.4.2 and go to the Device tab page.
2. Select the device to replace and click or double-click on the device; an Edit Device win-
dow appears;
3. Perform steps 5 to 10 (same steps for add a Device) in C2.3.4.2.
C2.3.4.5 Replacing YFGW710
1. Open a working project in Field Wireless Configurator;
2. Go to menu Tools – Download. The Download Project Data window appears. Check all
nodes in the Data to download field tree, except for Devices.
3. Press the [Start download] button to make sure your network configuration is updated. The
Download Progress window appears.
4. Wait for download to end. When the download completes, the [Save to file] button will be
enabled.
C2.3.4.6 Modifying Sampling Parameters
1. Perform steps 1 to 4 in C2.3.4.2 and open the Add Device window.
2. If the Sampling Parameters tab does not exist in the window, perform steps 6 to 10 in
C2.3.4.2. If the tab exists, go to step 3.
3. At the Sampling Parameters tab page, change the settings.
4. Press the [OK] button in the window.
5. Go to menu Tools – Download. Download Project Data window appears. If you have en-
tered EUI-64 and Join Key for the device, the corresponding Device node in the download
tree in the left will be checked.
6. Click the Start download button to make sure your network configuration is updated. The
Download Progress window appears;
7. Wait for download to end. When the download completes, the [Save to file] button will be
enabled.