Yokogawa YFGW710 - Manual (Page 75)

<B1. Engineering>
B1-11
IM 01W01F01-01EN
n Channels (System Manager/Security Manager Field)
An ISA100.11a field wireless network uses the wireless frequency band corresponding to each
channel defined in IEEE 802.15.4. When there is a band whose use is prohibited by the law of
the country or region where the wireless network is used, clear the check mark in front of the cor-
responding channel.
Table B1-6 RF Channel
ISA100.11a IEEE802.15.4 Band (MHz) ISA100.11a IEEE802.15.4 Band (MHz)
0 11 2405 8 19 2445
1 12 2410 9 20 2450
2 13 2415 10 21 2455
3 14 2420 11 22 2460
4 15 2425 12 23 2465
5 16 2430 13 24 2470
6 17 2435 14 25 2475
7 18 2440
15 (use is always
prohibited)
26 2480
n Backbone Router Field
Table B1-7 Setting Backbone Router
Parameter name Setting value Remark
Device Tag Specify the device tag of the backbone router. By default, the device tag is YFGW-
BBRnnn.
nnn is from 001 to 999, any of which is
automatically assigned so that the device
tag is unique in the project.
Filter Bit Mask 0xFFFF is specified by default. Do not change it.
Filter Target ID
(Subnet ID)
NetworkID = Subnet ID for YFGW710 that is
used in this system.
Display only
TIP
Filter Bit Mask and Filter Target ID
These parameters are used when constructing multiple logically independent field wireless networks on a single
field wireless network.
However, with respect to a system consisting of currently available wireless devices, a single logical field wireless
network is constructed on a single field wireless network like in the example of this system. Do not change the
filter bit mask and filter target ID but use the default values.
TIP
YFGW710 Field Wireless Integrated Gateway consists of functions that are Gateway, System Manager/Security
Manager and Backbone Router.