Yokogawa YFGW710 - Manual (Page 66)

<B1. Engineering>
B1-2
IM 01W01F01-01EN
B1.1 System Engineering Flow Overview
System
Engineer
User or
Startup Engineer
System
Engineer
System
Engineer
System
Engineer
or Startup
Engineer
(C)
Control System
Engineering
(CENTUM/STARDOM)
Field Wireless
Network Offline
Engineering
(Field Wireless
Configurator)
Download to YFGW710
(Field Wireless
Configurator)
Check Wireless
Network
Operation Conditions
(Field Wireless
Management Tool)
Set and Adjust
Device Parameters
(PRM)
Downloading of Process
Data Communication
Definitions
(Field Wireless
Configurator)
Provisioning
(FieldMate)
(A)
Maintenance
Staff
Operators
Operation/Monitoring
Loop Check
Device Management
If necessary
Person in Charge of Devices
Person
in Charge
of Devices
Person in Charge of Devices
Device Installation
(B)
System
Engineer
or Startup
Engineer
FB0101.ai
Person in Charge of Devices
Setting and adjusting
device parameters
(FieldMate *1)
Person in Charge of Devices
Figure B1-1 System Engineering Flow Overview
Figure B1-1 shows the system engineering flow overview of the field wireless system. This sys-
tem engineering is roughly classified into three tasks.
• (A) Setting and adjustment of field wireless devices by the person in charge of the devices
before the installation of them
• (B) Construction of a field wireless network by the system engineer (or the startup engineer)
• (C) Engineering of the control system by the system engineer
*1 Applicable for FieldMate R2.03.00 or later. This concerns Yokogawa field devices.
(Use PRM to set and adjust parameters of field devices of other manufacturers.)