Yokogawa YFGW710 - Manual (Page 83)

<B1. Engineering>
B1-19
IM 01W01F01-01EN
n Setting Provisioning Information
The setting of the device tag and network ID is performed using a provisioning function in Field-
Mate.
The device tag, network ID, and join key are set to the field wireless device. However, the join key
does not need to be entered because it is automatically generated by FieldMate.
l Setting Device Tag
A device tag is used for the user to identify the field wireless device.
Set “DEV_001” for the example of Figure B1-2.
l Setting Network ID
A network ID is used for the field wireless device to join the field wireless network.
Set a decimal value from 2 to 65535.
A field wireless device is able to join the field wireless network that matches the network ID set by
the provisioning task.
Set “100” for the example of Figure B1-2.
n Creating a Provisioning Information File
A provisioning information file includes the following information that was set to the field wireless
device by provisioning.
• Network ID
• Device Tag
• EUI-64
• Join Key
• Provisioner (Name of user who performed provisioning operation)
• Date (time of day at which provisioning was performed)
Keep this provisioning information file, which will be used to write data from Field Wireless Con-
figurator (described later) to YFGW710.
l Storing a Provisioning Information File
If a provisioning information file is lost, the same file as the lost provisioning information file can-
not be restored. The provisioning task must be performed again to create the file.
Keep provisioning information file carefully so as not to lose it.
l Creating Multiple Provisioning Information Files
Provisioning information on multiple field wireless devices can be recorded in a single provision-
ing information file. Furthermore, provisioning information files can be created for multiple de-
vices.