Yokogawa YFGW710 - Manual (Page 160)

<C3. Field Wireless Management Tool>
C3-6
IM 01W01F01-01EN
C3.3.1.1 Creating a New Connection
To create a new connection:
1. In the Connection drop-down list, enter a connection name or select an existing connection.
2. In the IP Address field, enter the IP Address of the YFGW710 to be connected.
3. Enter a valid username and password in the corresponding fields.
4. Check the [Save connection information] checkbox to store this connection in the Connec-
tions list. Enabling this option eliminates the need to enter the IP Address, Username and
Password inputs the next time you select this connection. (Connection parameters set by
the previous user will be displayed.)
5. Check the [Set as default] checkbox to set the current connection as a default. Enabling
this option selects the default connection automatically the next time you open the Connect
window.
Figure C 3-6
C3.3.1.2 Deleting a Connection
To delete a saved connection:
1. In the Connection drop-down list, select the connection to be deleted.
2. Click button. The system will request confirmation before deleting the connection; Click
[OK] to delete the connection or [Cancel] to abort the action.