Yokogawa YFGW710 - Manual (Page 184)

<C3. Field Wireless Management Tool>
C3-30
IM 01W01F01-01EN
7. Use the Get Radio Firmware Update Status command to view the status of the update
while it is still in progress.
8. When the update is complete, the new firmware version will be shown in the device list.
Figure C 3-29
2) Cancel Radio Firmware Update
This command allows you to cancel ongoing firmware update processes.
1. Select the Cancel Radio Firmware Update command from the Firmware Commands
drop-down list. The Cancel Radio Firmware Update window opens.
Figure C 3-30
2. At this window, select a device from the drop-down list by EUI-64 address and click
[OK]. You can only cancel the update command for one device at a time.
3. The Command Results window will show the results of the operation in the response
column.
The command returns the following responses:
• Success: Operation succeeded
• Device not exists: Device does not exist
• Timeout: Device timed out
• No active firmware update: No update of firmware during operation.