Yokogawa YFGW710 - Manual (Page 89)

<B1. Engineering>
B1-25
IM 01W01F01-01EN
n How to Change IP Address of YFGW710
To change the IP address of YFGW710 that is already connected by Ethernet, do it from Field
Wireless Configurator. The following describes the procedure.
There are two YFGW710 IP address input fields for Field Wireless Configurator.
One is IP Address displayed in the [Download Project Data] window (Figure B1-7).
The other is IP Address in the [IPv4 Settings] field on the page of the [Network Information] tab
(Figure B1-8).
FB0108.ai
Figure B1-8 IP Address Setting Window
When the YFGW710 download is performed, processing is performed in the following order and
YFGW710 starts with a new IP address, and finish the procedure of change IP address.
l IP Address displayed in the Download Project Data window
Field Wireless Configurator downloads the project database to YFGW710 with an IP address that
was entered in the [Download Project Data] window.
l IP Address in the IPv4 Settings field on the page of the Network Information
tab
When the download to YFGW710 is completed, YFGW710 restarts with an IP address that was
entered here.