NORD Drivesystems BU0700 - Manual (Page 107)

5.2 Parameter overview, User settings
BU 0700 GB-1411 Subject to technical alterations 107
Parameter
No.
Name
Factory
setting
Setting after commissioning
P 1 P 2 P 3 P 4
P622 Digital input 11 11
P623 Digital input 12 12
P624 (P) Relay 3 function 2
P625 (P) Relay 3 hyst. 1.00
P626 (P) Rel. 3 position 0
P627 (P) Relay 4 function 0
P628 (P) Relay 4 hyst. 1.00
P629 (P) Rel. 4 position 0.000
P630 (P) Position slip error 0.00
P631 (P) Abs./inc slip error.. 0.00
Parameter
No.
Name Actual status and displayed values
INFORMATION (5.1.8), read only
P700 (P) Current fault
P701 Last fault 1...5
P702 Freq. last error 1...5
P703 Current, last error 1...5
P704 Voltage last error 1...5
P705 DC link last error 1...5
P706 P-set last error 1...5
P707 Software version
P708 State of digital input (hex)
P709 Voltage analog input 1 [V]
P710 Analog output voltage [V]
P711 State of relays [binary]
P712 Voltage analog input 2 [V]
P713 Voltage analog output 2 [V]
P714 Operating time [h]
P715 Running time[h]
P716 Current frequency [Hz]
P717 Current speed [rpm]
P718 Current set frequency 1..3 [Hz]
P719 Actual current [A]
P720 Actual torque current [A]
P721 Actual field current
P722 Current voltage [V]
P723 Voltage -d [V]
P724 Voltage -q [V]
P725 Current cos phi
P726 Apparent power [kVA]
P727 Effective power [kW]
P728 Input voltage [V]
P729 Torque [%]
P730 Field [%]
P731 Parameter set