NORD Drivesystems BU0700 - Manual (Page 25)

3.1 Technology unit
BU 0700 GB-1411 Subject to technical alterations 25
Menu structure
The menu structure consists of various levels that are each arranged in a ring structure. The ENTER key moves the menu on to
the next level. Simultaneous operation of the SELECTION keys moves the menu back a level.
Parameter 1
management
P1201 2
Copy - Source
P1202 2
Copy - Target
P1204 2
Load default values
P1203 2
Copy - Start
P1205 2
Delete memory
P0 2
Back
Parameterization 1
Display 1
P1001 2
Bus scan
P1002 2
FI selection
P1004 2
Values for display
P1003 2
Display mode
P1005 2
Standardisation
factor
P0 2
Back
Options 1
P1301 2
Language
P1302 2
Operating mode
P1304 2
Contrast
P1303 2
Automatic bus scan
P1305 2
Set password
P1306 2
Box password
P0
zurück
700E 3,0kW/3 POS STD
1
Fi/Hz U/V I/O
45.0 360 3.4
ONLINE FI P1 R RUNNING
U1 U2 U3 U4 U5
1 - - - -
OK - - - -
100
P1307 2
Reset box paramet.
P0 2
Back
P0
zurück P1308 2
NORDAC p-box
Version 3.9
Basic parameters 2
>ENTER< (to level 3 )
P0 2
Back
Inverter menu structure,
dependent on installed
options (e.g. posicion, etc.)
 Section 5
Parameterisation
Motor data 2
>ENTER< (to level 3 )
Operating displays 2
>ENTER< (to level 3 .)
>Display< (P10xx), >Parameter management< (P12xx) and >Options< (P13xx) are purely ParameterBox parameters and have
nothing directly to do with the inverter parameters.
Access to the inverter menu structure is gained via the >Parameterisation< menu. The details depend upon the customer units
(SK CU1-...) and/or special extension units (SK XU1-...) connected to the inverter. The description of parameterisation begins in
Chapter 5.