HP XP P9500 Storage - Manual (Page 145)

5. Establish the logical paths in the forward direction (from the primary site to the secondary site)
from the primary site.
For Continuous Access Journal Z copy groups, establish the inter-disk controller logical paths.
For Continuous Access Synchronous Z or TrueCopy Asynchronous for Mainframe copy groups,
establish the inter-control unit logical paths.
For details on how to define a path set, see “Establishing a logical path” (page 540) .
6. Define the route list for the forward and reverse directions (from the primary site to the
secondary site, and from the secondary site to the primary site) from the primary site.
7. Register a command device for the forward direction in the storage systems of the primary
and secondary sites from the primary site.
For details on how to register a command device, see “Registering a command device in a
storage system” (page 568) .
Defining a 2DC configuration 145