HP XP P9500 Storage - Manual (Page 199)

•
Procedure for registering a command device
For details, see “Registering a command device in a storage system” (page 568) . For details
on how to operate the ISPF panels, see “Local scan procedure” (page 518) .
•
Procedure for defining a copy group
For details on how to operate the ISPF panels, see “Local scan procedure” (page 518) , “Defining
an EXCTG” (page 587) , and “Establishing a logical path” (page 540) .
Creating a Disk Configuration Definition File
Scan the storage system to create a disk configuration definition file. Perform a scan that includes
the volumes to be defined in the copy group and the command device. In a delta resync
configuration, because operations might be necessary at each site, you need to perform a scan
from each host, instead of a Remote Scan, to acquire the correct information, such as the device
number (DEVN).
To perform a scan from each host in a delta resync configuration to create a disk configuration
definition file:
1.
Perform a Local Scan at the primary site from the primary host.
2. Perform a Local Scan at the local site from the local host.
3. Perform a Local Scan at the remote site from the remote host.
4. Transfer the disk configuration definition file containing the scan results of each site to the
other sites so that each site will have the scan results from all the sites.
Settings at the Primary Site
To set operations at the primary site:
Defining a Delta Resync Configuration 199