Settings for operations at remote site 1 – HP XP P9500 Storage User Manual
Page 189
Advertising
4.
From the primary host, register a command device for the storage systems at the primary site,
remote site 1, and remote site 2.
Settings for operations at remote site 1
1.
From remote host 1, define a path set consisting of inter-disk controller logical paths (Remote
1
→ Primary, and Remote 1 → Remote 2) (or use Remote Web Console to set up paths).
2.
From remote host 1, create a route list (Remote 1
→ Primary, and Remote 1 → Remote 2
routes).
Defining a 3DC Multi-Target (Cnt Ac-J Z x Cnt Ac-J Z) configuration 189
Advertising