Settings for operations at the primary site – HP XP P9500 Storage User Manual
Page 188
Advertising
Settings for operations at the primary site
1.
From the primary host, define a path set consisting of inter-disk controller logical paths (primary
site
→ remote site 1, and primary site → remote site 2) (or use Remote Web Console to set
up paths).
2.
From the primary host, create a route list (primary site
→ remote site 1, and primary site →
remote site 2 routes).
3.
From the primary host, establish inter-disk controller logical paths (Primary
→ Remote 1, and
Primary
→ Remote 2).
188 Configuration definitions
Advertising