HP XP P9500 Storage - Manual (Page 410)

13. From the primary site, execute the YKRESYNC DELTAJNL command for the delta resync pair.
•
YKQUERY
•
YKRESYNC DELTAJNL
•
YKEWAIT GOTO(DUPLEX)
If the command is successful, the Continuous Access Journal Z copy pair at the local site and
the remote site is automatically moved to the HOLD status (delta resync pair).
Operation is returned to normal.
NOTE: If during operation the status of a delta resync pair changes to HOLDTRNS, NODELTA,
or HOLDER, see “Actions to be Taken When the Delta Resync Function Cannot be Set Up or
Operated Successfully” (page 428) .
Operating Procedure During a Primary Site Storage System Failure (Nonvolatile)
The following are the procedures to be performed when the primary site storage system is in a
nonvolatile failure state.
Failover
The failover procedure to be performed when the primary site storage system is in a nonvolatile
failure state is the same as the failover procedure to be performed when the primary site storage
system is in a volatile failure state. See
“Failover” (page 405) in “Operating Procedure During a
Primary Site Storage System Failure (Volatile)” (page 404) .
Failback
1. Recover the primary site storage system from failure.
2. From the local site, execute the YKDELETE command for the Continuous Access Journal Z
copy pair.
410 Maintenance and troubleshooting operations