HP XP P9500 Storage - Manual (Page 552)

AC RouteList ID ------------
MULTI
UR2DC
CAA1
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F12=Cancel
Defining the primary site storage system (primary
→local)
To define the storage system that has the serial number 14002 as the first storage system of a
route:
1.
Specify s in the AC column for the route list that defines the route.
Route Config Row 1 to 3 of 3
Command ===>
Scroll ===> PAGE
2011/08/16 10:24:13
Supported actions: s(Select), d(Delete)
AC RouteList ID ------------
s MULTI
UR2DC
CAA1
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F12=Cancel
A list of storage systems is displayed for the routes defined in the route list selected from the
Route List Information panel. (Initially, a list of storage systems is not displayed because no
storage systems have been defined.)
Route List Information
Command ===>
Scroll ===> PAGE
2011/08/16 10:24:21
Route List ID . . . : MULTI
Supported actions: s(Select), i(Insert), e(Edit), d(Delete)
-------1st-------- -------2nd-------- -------3rd--------
AC----DADID (SN)-- AC----DADID (SN)-- AC----DADID (SN)--
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F10=Prev
F11=Next F12=Cancel
2. Press the F5=Add key.
The Add Route Entry panel appears.
Route List Information
Command ===> ADD Scroll ===> PAGE
.------------------------------------------------------. 1/08/16 10:24:32
Rou | Add Route Entry |
| Command ===>
|
Sup | |
--- | Add a storage system to the route list : MULTI | -----
AC- | | SN)--
*** | Select either of the following numbers, depending | ******************
| on the type of storage system you want to register: |
| 1 1. A storage system discovered via a |
| local scan or a remote scan |
| 2. A new storage system discovered via a |
| remote scan |
552 Using the ISPF panels