Defining a route list id – HP XP P9500 Storage User Manual
Page 551
AC Label APID AC DEVN SSID CU CCA AC DEVN SSID CU CCA AC DEVN SSID CU CCA
0001 735F 2340 00 1F **** 6800 00 6F
******************************* Bottom of data ********************************
F1=Help F3=Exit F5=Add F7=Backward F8=Forward F10=Prev
F11=Next F12=Cancel
Defining a route list for a 3DC Multi-Target (Cnt Ac-S Z x Cnt Ac-J Z) configuration
This section explains how to define a route list for a 3DC Multi-Target (Cnt Ac-S Z x Cnt Ac-J Z)
configuration by using the example shown in the following figure.
In the example, assume that neither a Local Scan nor a Remote Scan has been performed for the
local site storage system and the remote site storage system.
Figure 125 Definition example of a route list (3DC Multi-Target (Cnt Ac-S Z x Cnt Ac-J Z)
configuration)
Defining a route list ID
Using the procedure described in
“Defining a route list ID” (page 542)
of
a 2DC configuration” (page 541)
, define the following route list ID: MULTI.
The route list is registered in the Route Config panel.
Route Config Row 1 to 3 of 3
Command ===>
Scroll ===> PAGE
2011/08/16 10:24:11
Supported actions: s(Select), d(Delete)
Defining a route list
551