Preparing the hardware (open/mf consistency), Preparing the hardware (open/mf – HP XP P9500 Storage User Manual
Page 268
Figure 100 Configuration Example for Using the Open/MF Consistency Preservation Function
Preparing the hardware (Open/MF Consistency)
lists the prerequisite hardware and Table 5-36 lists the hardware settings for
using the Open/MF Consistency Preservation Function.
Table 86 Prerequisite Hardware (for Using the Open/MF Consistency Preservation Function)
Remarks
Description
Item
Installation of a host at the secondary site
is optional.
One host is at the primary site and
another host is at the secondary site
Host
—
Primary site: one or more
XP12000/XP10000 or
XP24000/XP20000 Disk Arrays
Storage system
Secondary site: one or more
XP12000/XP10000 or
XP24000/XP20000 Disk Arrays
Operation is only possible in forward
direction paths. However, when
A bidirectional physical path must be
established between the primary and
Physical path
operations from the secondary site,
connect a bidirectional path beforehand.
secondary sites, connected by the FCP
cable. (A reverse direction path is
recommended but not mandatory.)
268 Configuration definitions