HP XP P9500 Storage - Manual (Page 522)

12. Specify s in the AC column to display detailed information.
In the Control Unit Selection List panel, the scan result appears for each CU.
13. Specify s in the AC column to display further detailed information.
The Command Control Address (CCA) Selection List panel displays the scanning results within
the CU by CCA (device).
14. Press the F3=Exit key to save the scan result into a disk configuration definition file.
Disk configuration definition file name: prefix.DSK.SNnnnnn.dad-id
In the configuration example in “Volume configuration example for acquiring device information
” (page 518) , a disk configuration definition file named CONFIG01.DSK.SN14001.LA is
generated.
Transferring a disk configuration definition file from the secondary site to the primary
site
To transfer the disk configuration definition file of the secondary site to the primary site:
•
Transfer the scan result to the primary site.
The disk configuration definition file that has the same prefix is stored on the primary site.
Menu Options View Utilities Compilers Help
------------------------------------------------------------------------------
DSLIST - Data Sets Matching CONFIG01.TESTCC Row 1 of 38
Command ===>
Scroll ===> PAGE
Command - Enter "/" to select action Message Volume
-------------------------------------------------------------------------------
CONFIG01.DSK.SN14001.LA YUKON1
CONFIG01.DSK.SN14002.SF YUKON2
******************************* Bottom of data ********************************
F1=Help F2=Split F3=Exit F5=Rfind F7=Up F8=Down F9=Swap
F10=Prev F11=Next F12=Cancel
The scan information transferred from the secondary site also appears in the Discover HP
Storage Arrays panel on the primary site.
Discover HP Storage System Row 1 to 2 of 2
Command ===>
Scroll ===> PAGE
2008/02/26 15:31:08
Supported actions: s(Select), d(Delete), r(Remote), e(Edit devn)
AC S/N Device Address Domain ------ Description --------------------
14001 LA LOS ANGELS SAMPLE
14002 SF SAN FRANCISCO SAMPLE
******************************* Bottom of data ********************************
F1=Help F3=Exit F4=Discover F7=Backward F8=Forward F12=Cancel
NG scan procedure
You can use an NG scan to acquire Non Gen'ed volumes on the local site. This section explains
how to execute a local scan involving Non Gen'ed volumes on the primary site, using the volume
configuration example shown in
Figure 121 (page 523) .
522 Using the ISPF panels