HP XP P9500 Storage User Manual
Page 154
5.
Register a command device for the forward direction in the storage systems of the primary
and intermediate sites.
This creates the command device definition file.
For details on how to register a command device in a storage system, see
command device in a storage system” (page 568)
.
6.
Perform a remote scan at the storage system of the intermediate site.
Perform a scan over a range that contains volumes to be defined in the copy group.
This creates disk configuration definition file for the intermediate site.
For details on how to perform a scan to acquire hardware information, see
7.
Establish an inter-disk controller logical path (Intermediate
→ Remote).
Establishing an inter-disk controller logical path is part of creating the path set definition file.
8.
Register a command device for the forward direction in the storage system of the remote site.
154 Configuration definitions