Defining a delta resync configuration, Configuration example (delta resync configuration) – HP XP P9500 Storage User Manual
Page 192
For MIRROR ID in the Copy Group Attributes (CAJ) panel, specify a value that is different from
the MIRROR ID values for other Continuous Access Journal Z copy pairs between the primary
site and remote site 1.
3.
Define a Continuous Access Journal Z copy group between remote site 1 and remote site 2.
For C/T ID (JNLG) in the Setting C/T ID Attributes panel, specify the value that was specified
for Sub C/T ID (JNLG) for the Continuous Access Journal Z copy group between the primary
site and remote site 1. For Sub C/T ID (JNLG), specify the value that was specified for Sub C/T
ID (JNLG) for the Continuous Access Journal Z copy group between the primary site and remote
site 2.
For MIRROR ID in the Copy Group Attributes (CAJ) panel, specify a value that is different from
the MIRROR ID values for other Continuous Access Journal Z copy pairs between the primary
site and remote site 1 and between the primary site and remote site 2.
4.
Create a copy pair for the Continuous Access Journal Z copy group between the primary site
and remote site 1.
5.
Create a copy pair for the Continuous Access Journal Z copy group between the primary site
and remote site 2.
6.
Transfer the configuration file for three copy groups to remote site 1 and remote site 2.
Defining a Delta Resync Configuration
This section explains how to define a Delta Resync configuration. The following legend is used for
the figures in this section.
Configuration Example (Delta Resync configuration)
shows an example of a delta resync configuration.
192 Configuration definitions