HP XP P9500 Storage - Manual (Page 190)

3. From remote host 1, establish inter-disk controller logical paths (Remote 1
→ Primary, and
Remote 1
→ Remote 2).
4. From remote host 1, register a command device for the storage systems at remote site 1,
primary site, and remote site 2.
Settings for operations at remote site 2
1. From remote host 2, create a path set consisting of inter-disk controller logical paths (Remote
2
→ Primary, and Remote 2 → Remote 1) (or use Remote Web Console to set up paths).
190 Configuration definitions