Goulds Pumps 3196 i-FRAME - IOM - Manual (Page 50)

Commissioning, Startup, Operation, and Shutdown
1. Annular groove
2. End plate (pump end)
3. Guard half
4. Use a bolt, a nut, and two washers to secure the coupling guard half to the end plate.
Tighten securely.
1. Nut
2. Washer
3. Bolt
5. Put the driver half of the coupling guard in place:
a) Slightly spread the bottom apart.
48 Model 3196 i-FRAME Installation, Operation, and Maintenance Manual