Lenze EDK71MMXXX−010 - Manual (Page 87)

Electrical installation
Connection diagram
5
EDK71MMXXX−010 DE/EN/FR 5.0
87
L
Terminal Data Function (bold = Lenze setting)
X3/59 Supply voltage connection +24 VDC
Reference: X3/7 +18 VDC − 0 % ... +30 VDC + 0 %)
Min. 200 mA
Max. 1.5 A (all inputs and outputs
are connected)
X3/20 DC voltage output + 24 VDC
Reference: X3/7 +18 VDC ... +30 VDC
Max. 500 mA
X3/7 Reference potential
Digital inputs
X3/28 Release/inhibit starttec HIGH starttec released LOW (0 V ... +3 V)
HIGH (+12 V ... +30 V)
R
i
= > 4 k W
Function in C0410 is freely
assignable
LOW starttec inhibited
X3/E1 Start motor 1 HIGH Start motor 1
LOW Stop motor 1
X3/E2 Function not active
Start motor 2
X3/E3 Brake control HIGH Release brake
LOW Apply brake
X3/E4 Not assigned
X3/E5
Digital outputs
X3/A1 Status of motor 1 HIGH Motor 1 is running LOW (0 V ... +3 V)
HIGH (+12 V ... +30 V)
Max. 200 mA per output
Function in C0415 is freely
assignable
LOW Motor 1 is stopped
X3/A2 Function not active
(Status motor 2)
X3/A3 Status of brake HIGH Brake is released
LOW Brake is applied
X3/A4 Not assigned
Motor temperature monitoring
X3/T1 Motor temperature monitoring connection with thermal
contact (NC contact) or PTC l Remove bridge between X3/T1
and X3/T2
l Route supply cable to X3/T1
and X3/T2 separately X3/T2
AS interface
X3/A+ AS interface connection Only active for E71MM402FxAxxx
^ 91
X3/A−