Lenze EDK71MMXXX−010 - Manual (Page 92)

5
Electrical installation
Connection of AS interface
EDK71MMXXX−010 DE/EN/FR 5.0
L
92
Bus connection
)
Note!
If you use a flat cable for the bus connection, we recommend the E82ZMFF
adapter.
A+ A+ A- A- X3 X3
starttec
E71MM402 xAxxx F
starttec
E71MM402 xAxxx F X3
6mm
0
1
E82ZMFF
start036 E82ZAFF004
1. Screw part 0 into a proper thread of the support housing
2. Insert AS−I flat cable in part 1 and plug the correct side of part 1 onto part 0
3. Secure fastening screws
4. Assign terminals:
Terminal Stranded wire colour
(IEC757) Note
X3/A+ BN (brown) Please observe the notes in the AS−I system description about the
electrical connection of peripheral devices.
X3/A− BU (blue)