Rockwell Automation 20-750-ENETR PowerFlexDual-Port EtherNet/IP Option Module User Manual
Page 119
Rockwell Automation Publication 750COM-UM008A-EN-P - July 2012
119
Troubleshooting
Chapter 7
27
DL To Net 01 Val
The present value of respective Host DL To Net xx parameter being received from the drive by this option
module. (If not using a Datalink, its respective value should be zero.)
28
DL To Net 02 Val
29
DL To Net 03 Val
30
DL To Net 04 Val
31
DL To Net 05 Val
32
DL To Net 06 Val
33
DL To Net 07 Val
34
DL To Net 08 Val
35
DL To Net 09 Val
36
DL To Net 10 Val
37
DL To Net 11 Val
38
DL To Net 12 Val
39
DL To Net 13 Val
40
DL To Net 14 Val
41
DL To Net 15 Val
42
DL To Net 16 Val
43
DPI Rx Errs
The present value of the DPI Receive error counter.
44
DPI Rx Errs Max
The maximum value (since reset) of the DPI Receive error counter.
45
DPI Tx Errs
The present value of the DPI Transmit error counter.
46
DPI Tx Errs Max
The maximum value (since reset) of the DPI Transmit error counter.
47
SI Primary Err
Number of CRC errors detected by the option module in the primary channel (Logic Status and Feedback)
of the Serial Interface from the drive.
48
SI Secondary Err
Number of CRC errors detected by the option module in the secondary channel (Datalinks) of the Serial
Interface from the drive.
49
50
51
52
53
54
HW Addr 1
HW Addr 2
HW Addr 3
HW Addr 4
HW Addr 5
HW Addr 6
Decimal value of each byte in the option module’s Ethernet hardware address.
55
56
57
58
IP Addr Act 1
IP Addr Act 2
IP Addr Act 3
IP Addr Act 4
Value of each byte in the option module’s present IP address. A value of “0” appears if the option module
does not currently have an IP address.
Table 10 - Adapter Mode Diagnostic Items (Continued)
No.
Name
Description
255 : 255 : 255 : 255 : 255 : 255
[HW Addr 1]
[HW Addr 2]
[HW Addr 3]
[HW Addr 4]
HW Addr 5]
[HW Addr 6]
255 . 255 . 255 . 255
[IP Addr Act 1]
[IP Addr Act 2]
[IP Addr Act 3]
[IP Addr Act 4]