Rockwell Automation 20-750-ENETR PowerFlexDual-Port EtherNet/IP Option Module - Manual (Page 162)

162 Rockwell Automation Publication 750COM-UM008A-EN-P - July 2012
Appendix C EtherNet/IP Objects (Adapter mode only)
Instance Attributes
20 Set Customer-Generated Firmware STRING[36] GUID (Globally Unique Identifier) identifying customer firmware
upgraded into the device.
30 Get International Status Text STRINGN Text describing the status of device with support for Unicode.
31 Get/Set International User Definable Text STRINGN Text identifying the device with a user-supplied name with
support for Unicode.
34 Get Key Information STRUCT of:
UDINT
UDINT
UINT
UINT
UINT
USINT
USINT
USINT
USINT
USINT
USINT[16] Rating Code
Device Serial Number
Customization Code
Customization Revision
Brand Code
Family Code
Config Code
Language Code
Major Revision
Minor Revision
Customer-Generated Firmware UUID
35 Get NVS CRC UDINT A 32-bit CRC of the Nonvolatile Storage in a device.
38 Set ADC Configuration Signature USINT[16] Value stored by the device and zeroed if its configuration
changes.
39 Get SI Driver Code UINT Code identifying the protocol between the device and host.
128 Get Customization Code UINT Code identifying the customized device.
129 Get Customization Revision Number UINT Revision of the customized device.
130 Get Customization Device Text STRING[32] Text identifying the customized device.
Attribute ID Access Rule Name Data Type Description
Attribute ID Access Rule Name Data Type Description
3 Get Component Name STRING[32] Name of the component
4 Get Component Firmware Revision STRUCT of:
USINT
USINT Major Revision
Minor Revision
8 Get Component Serial Number UDINT Value between 0x00000000 and 0xFFFFFFFF
9 Get International Component Name STRINGN Name of the component with support for Unicode.