Rockwell Automation 20-750-ENETR PowerFlexDual-Port EtherNet/IP Option Module - Manual (Page 7)

Rockwell Automation Publication 750COM-UM008A-EN-P - July 2012 7
Preface
This manual provides information about the 20-750-ENETR Dual-port
EtherNet/IP Option Module for network communication and how to use the
module with PowerFlex 750-Series drives.
Conventions Used in This
Manual The following conventions are used throughout this manual:
• Parameter names are shown in the format Device Parameter xx - [*] or
Host Parameter xx - [*]. The xx represents the parameter number. The *
represents the parameter name—for example,
Device Parameter 01 -
[Operating Mode] .
• The firmware revision number (FRN) is displayed as FRN X.xxx, where
‘ X’ is the major revision number and ‘xxx’ is the minor revision number.
• For the screen captures in this manual, the following software was used:
–
RSLinx Classic software, version 2.52
– RSLogix 5000 software, version 16.00 and, for Automatic Device
Configuration information, version 20.00
Different versions of the software may differ in appearance and
procedures.
Rockwell Automation
Support Rockwell Automation offers support services worldwide, with over 75 sales and
support offices, over 500 authorized distributors, and over 250 authorized
systems integrators located through the United States alone. In addition,
Rockwell Automation representatives are in every major country in the world.
Local Product Support
Contact your local Rockwell Automation representative for the following:
• Sales and order support
• Product technical training
• Warranty support
• Support service agreements
Technical Product Assistance
For technical assistance, please review the information in Chapter 7 ,
Troubleshooting, first. If you still have problems, then access the Allen-Bradley
Technical Support website at
http://www.ab.com/support/abdrives or contact
Rockwell Automation.