Rockwell Automation 20-750-ENETR PowerFlexDual-Port EtherNet/IP Option Module - Manual (Page 34)

34 Rockwell Automation Publication 750COM-UM008A-EN-P - July 2012
Chapter 3 Configuring the Option Module
The BOOTP/DHCP Server dialog box appears.
To properly configure devices on the EtherNet/IP network, you must
configure settings in the BOOTP/DHCP software to match the network.
4. From the Tools menu, choose Network Settings.
The Network Settings dialog box opens.
5. Edit the following:
6. Click OK to apply the settings.
Devices on the network issuing BOOTP/DHCP requests appear in the
BOOTP/DHCP Request History list.
Box Type
Subnet Mask
(1)
(1) For definitions of these terms, see the Glossary .
The subnet mask for the option module’s network.
Gateway
(1)
The IP address of the gateway device on the option module’s network.
Primary DNS The address of the primary DNS server to be used on the local end of the link for
negotiating with remote devices.
Secondary DNS Optional—the address of the secondary DNS server to be used on the local end of the
link for negotiating with remote devices when the primary DNS server is unavailable.
Domain Name The text name corresponding to the numeric IP address that was assigned to the server
that controls the network.