Rockwell Automation 20-750-ENETR PowerFlexDual-Port EtherNet/IP Option Module User Manual
Page 120
120
Rockwell Automation Publication 750COM-UM008A-EN-P - July 2012
Chapter 7
Troubleshooting
59
60
61
62
Subnet Act 1
Subnet Act 2
Subnet Act 3
Subnet Act 4
Value of each byte in the option module’s present subnet mask. A value of “0” appears if the option module
does not currently have a subnet mask.
63
64
65
66
Gateway Act 1
Gateway Act 2
Gateway Act 3
Gateway Act 4
Value of each byte in the option module’s present gateway address. A value of “0” appears if the option
module does not currently have a gateway address.
67
Net Rx Overruns
The number of receive buffer overruns reported by the Ethernet hardware.
68
Net Rx Packets
The number of Ethernet packets that the option module has received.
69
Net Rx Errors
The number of receive errors reported by the Ethernet hardware.
70
Net Tx Packets
The number of Ethernet packets that the option module has sent.
71
Net Tx Errors
The number of transmit errors reported by the Ethernet hardware.
72
Missed IO Pkts
The number of incoming I/O connection packets that the option module did not receive.
73
Net Addr Sw
The present value of the option module node address (rotary) switches.
74
MDIX Status
Indicates the type of cable connected to the option module’s ports.
P1 = ENET1 network port and P2 = ENET2 network port.
Bit 0 - P1 Normal; Bit 1 - P1 Swapped;
Bit 2 - P2 Normal; Bit 3 - P2 Swapped
75
Boot Flash Count
Number of times the boot firmware in the option module has been upgraded.
76
App Flash Count
Number of times the application firmware in the option module has been upgraded.
77
FPGA Flash Count
Number of times the FPGA configuration in the option module has been upgraded.
Table 10 - Adapter Mode Diagnostic Items (Continued)
No.
Name
Description
255 . 255 . 255 . 255
[Subnet Act 1]
[Subnet Act 2]
[Subnet Act 3]
[Subnet Act 4]
255 . 255 . 255 . 255
[Gateway Act 1]
[Gateway Act 2]
[Gateway Act 3]
[Gateway Act 4]