Rockwell Automation 20-750-ENETR PowerFlexDual-Port EtherNet/IP Option Module - Manual (Page 186)

186 Rockwell Automation Publication 750COM-UM008A-EN-P - July 2012
Appendix C EtherNet/IP Objects (Adapter mode only)
5 Get Media Counters STRUCT of:
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
UDINT
RX = Received, TX = Transmitted
RX frames not having integral number of octets long
RX frames not passing FCS check
TX frames having one collision
TX frames having multiple collisions
Number of times of SQE test error message
TX Frames delayed first attempt by busy medium
Collisions detected later than 512 bit-times in trans.
TX frames failing due to excessive collisions
TX frames failing due to intern MAC sublayer TX error
Times of carrier sense condition loss during trans
RX frames exceeding the maximum frame size
RX frames failing due to intern MAC sublayer RX error
6 Set Interface Control STRUCT of:
WORD
UINT Control bits
Forced interface speed
7 Get Interface Type USINT Type of interface; 2 = twisted-pair
10 Get Interface Label SHORT_STRING “1” = ENET1 network port
“2” = ENET2 network port
Attribute ID Access Rule Name Data Type Description