Rockwell Automation 20-750-ENETR PowerFlexDual-Port EtherNet/IP Option Module User Manual
Page 73
Advertising
Rockwell Automation Publication 750COM-UM008A-EN-P - July 2012
73
Configuring the I/O
Chapter 4
11.
Click the ADC icon
to open the ADC Settings dialog box.
The ADC Settings dialog box provides a single location for ADC
configuration of the drive’s ports. Global checkboxes at the top of each
column checks or unchecks the entire column. Ports can also be turned
on/off individually. See the checkbox selection information in step 3 for
additional details.
The Safety section in the lower part of the ADC Settings dialog box will
only be displayed if a Safe Speed Monitor Module is present.
12.
Click OK when finished.
13.
Perform all previous steps for each additional PowerFlex 750-Series drive.
Advertising