Rockwell Automation 20-750-ENETR PowerFlexDual-Port EtherNet/IP Option Module - Manual (Page 95)

Rockwell Automation Publication 750COM-UM008A-EN-P - July 2012 95
Using the I/O (Adapter mode only) Chapter 5
Controller Tags
When you add the option module and drive to the I/O configuration
(
Chapter 4 ), RSLogix 5000 software automatically creates generic (non-
descriptive) controller tags. In this example program, the following controller
tags are used.
You can expand the Input and Output tags to reveal the input and output
configuration. The Input tag for this example requires nineteen 32-bit words of
data (
Figure 18 ). The Output tag for this example program requires eighteen 32-
bit words of data ( Figure 19 ).
Figure 18 - ControlLogix Controller Input Image for Drive Generic Profile Example Ladder Logic
Program
Figure 19 - ControlLogix Controller Output Image for Drive Generic Profile Example Ladder Logic
Program