Diagnostic items for tap mode operation, Table 11 – Rockwell Automation 20-750-ENETR PowerFlexDual-Port EtherNet/IP Option Module User Manual

Page 121

Advertising
background image

Rockwell Automation Publication 750COM-UM008A-EN-P - July 2012

121

Troubleshooting

Chapter 7

Diagnostic Items for Tap Mode Operation

Table 11 - Tap Mode Diagnostic Items

No.

Name

Description

1

Common Logic Cmd

The present value of the Common Logic Command being transmitted to the drive by this option module.

2

Prod Logic Cmd

The present value of the Product Logic Command being transmitted to the drive by this option module.

3

Reference

The present value of the Reference being transmitted to the drive by this option module.

4

Common Logic Sts

The present value of the Common Logic Status being received from the drive by this option module.

5

Prod Logic Sts

The present value of the Product Logic Status being received from the drive by this option module.

6-42

Reserved

43

DPI Rx Errs

The present value of the DPI Receive error counter.

44

DPI Rx Errs Max

The maximum value (since reset) of the DPI Receive error counter.

45

DPI Tx Errs

The present value of the DPI Transmit error counter.

46

DPI Tx Errs Max

The maximum value (since reset) of the DPI Transmit error counter.

47-48

Reserved —

49

50

51

52

53

54

HW Addr 1

HW Addr 2

HW Addr 3

HW Addr 4

HW Addr 5

HW Addr 6

Decimal value of each byte in the option module’s Ethernet hardware address.

55

56

57

58

IP Addr Act 1

IP Addr Act 2

IP Addr Act 3

IP Addr Act 4

Value of each byte in the option module’s present IP address. A value of “0” appears if the option module
does not currently have an IP address.

59

60

61

62

Subnet Act 1

Subnet Act 2

Subnet Act 3

Subnet Act 4

Value of each byte in the option module’s present subnet mask. A value of “0” appears if the option module
does not currently have a subnet mask.

63

64

65

66

Gateway Act 1

Gateway Act 2

Gateway Act 3

Gateway Act 4

Value of each byte in the option module’s present gateway address. A value of “0” appears if the option
module does not currently have a gateway address.

255 : 255 : 255 : 255 : 255 : 255

[HW Addr 1]

[HW Addr 2]

[HW Addr 3]

[HW Addr 4]

HW Addr 5]

[HW Addr 6]

255 . 255 . 255 . 255

[IP Addr Act 1]

[IP Addr Act 2]

[IP Addr Act 3]

[IP Addr Act 4]

255 . 255 . 255 . 255

[Subnet Act 1]

[Subnet Act 2]

[Subnet Act 3]

[Subnet Act 4]

255 . 255 . 255 . 255

[Gateway Act 1]

[Gateway Act 2]

[Gateway Act 3]

[Gateway Act 4]

Advertising