Rockwell Automation 20-750-ENETR PowerFlexDual-Port EtherNet/IP Option Module - Manual (Page 84)

84 Rockwell Automation Publication 750COM-UM008A-EN-P - July 2012
Chapter 4 Configuring the I/O
Figure 13 - Input Image Controller Tags
Figure 14 - Output Image Controller Tags
Saving the I/O Configuration to the Controller
After adding the bridge and drive/option module to the I/O configuration, you
must download the configuration to the controller. You should also save the
configuration to a file on your computer.
1. From the Communications menu in the RSLogix 5000 dialog box, choose
Download.
TIP When using RSLogix 5000 software, version 16.00 or later, you can add the I/O
configuration of a Generic Profile while the controller is online and in the Run
mode.