Rockwell Automation 1756-HIST2G Historian ME 2.1 - Manual (Page 128)

F ACTORY T ALK H ISTORIAN ME M ODULE U SER ’ S G UIDE
118
Manually Transferring Points
To map data points to the FactoryTalk Historian SE server, select the points in the
table by checking the checkboxes, and click [Save]. To confirm the points have been
mapped to the FactoryTalk Historian SE, click [Search]. The points you selected for
mapping should have a Y in the Created in SE column.
After transferring the data, you can perform a search in FactoryTalk Historian SE
[using the FactoryTalk Historian SE System Management Tool (SMT)] to verify the
points have been mapped to the FactoryTalk Historian SE.
Removing Points from Data Transfer
If you no longer want to transfer data for a point or points, clear the checkbox in the
table for those points. Note that this only removes them from the Data Transfer
service. To remove the points from FactoryTalk Historian SE, and thereby free up
license space, you must delete the points in FactoryTalk Historian SE.
The "FTMS" Available Points value may not update immediately because it takes
approximately fifteen minutes to update the FactoryTalk Historian SE server.