Rockwell Automation 1756-HIST2G Historian ME 2.1 - Manual (Page 40)

F ACTORY T ALK H ISTORIAN ME M ODULE U SER ’ S G UIDE
30
Logging In to the FactoryTalk Historian ME
Access FactoryTalk Historian ME through your Microsoft Internet Explorer (IE)
browser.
1. Open your IE browser.
2. Enter the IP address of the FactoryTalk Historian ME in the Address field. The IP
address scrolls across the LED display on the front panel of the FactoryTalk
Historian ME.
Note that the default network configuration type is DHCP. If a DHCP server is not
available, then an IP address will not be displayed. You will either need to
configure a DHCP server or use the AOP to set the IP address.
If a large number of tags is being transferred from the Controller to the module when the
module is going through an initial bootup, please wait about five to ten minutes before
trying to access the web interface.