Rockwell Automation 1756-HIST2G Historian ME 2.1 - Manual (Page 79)

5 • M ANAGING P OINTS
69
You can create a maximum of 2500 data points per FactoryTalk Historian ME. If you
exceed 2500 data points, the Create button will automatically become deactivated.
You can deselect points from the Select field to reduce the number of points. When
the point count is less than 2501, the Create button will automatically become
reactivated.
The Search Results table contains the following information:

Select - displays checkboxes that allow you to select or clear which tags to create.

Name - the name of the tag found in the controller. The name is a combination of
the ControlLogix project name added as the prefix to the controller tag name.

Type - displays the type of data that the controller tag stores.

Rate - displays the current scan rate for each tag. To change the scan rate, click
[Change Scan Rate].

Path - displays the path to each tag in the device. The path is a combination of the
ControlLogix project name and its slot location [also known as its Control and
Information Protocol (CIP) path].
Stop Data Collection before adding and creating points to ensure minimal impact on
Logix controller memory.
For information on manually creating individual points, see “Manually Creating and
Editing Points”.