Rockwell Automation 1756-HIST2G Historian ME 2.1 - Manual (Page 163)

8 • A DMINISTERING THE M ODULE
153
Restarting the Module
To restart the module, you can:

Remove it from the chassis and reinsert it into the chassis.

Cycle the chassis power.

Use the FactoryTalk Historian ME AOP in RSLogix 5000.
Rebooting the Module
To reboot the module, click Advanced in the top navigation bar, and then click
Module Shutdown
in the left navigation bar. The Module Reboot section displays a
message:
“Module Reboot will stop all FTH ME related services
and reboot the module. The FTH ME Web will be available
after a few minutes.”
Cycling the power on the chassis will cause FactoryTalk Historian ME to shut
down. Do not cycle the power unless you have first shut down the module. To shut
down the module, click Advanced in the top navigation bar, and go to the Module
Shutdown page. Press [Module Shutdown].
See “Using the AOP Module Properties Configuration Tab” for more information.