Rockwell Automation 1756-HIST2G Historian ME 2.1 - Manual (Page 257)

D • RSL OGIX 5000 A DD - ON P ROFILE
247
Setting Up an Ethernet Driver
After installing AOP, ensure that you install and configure an Ethernet driver using
RSLinx Classic. This allows you to connect to your processor and download Ladder
logic to the controller.
1. Launch RSLinx Classic by going to Start > Programs > Rockwell Software >
RSLinx > RSLinx Classic.
2. Configure an Ethernet driver.
a. From the Communications drop-down menu, select Configure Drivers.
b. From the Available Driver Types drop-down menu, select Ethernet devices.
See the RSLinx Classic online help for additional information.