Rockwell Automation 1756-HIST2G Historian ME 2.1 - Manual (Page 182)

F ACTORY T ALK H ISTORIAN ME M ODULE U SER ’ S G UIDE
172
.
13. Repeat steps 3-12 to create a webs trust. Replace datatransfer with webs and add
the appropriate information.
14. Select File > Exit from the drop-down menu to exit the SMT application.
If you are configuring Data Transfer in the FactoryTalk Historian ME web interface
next, you need to ensure that your FactoryTalk Historian SE is configured for Data
Transfer. For example, the FactoryTalk Activation licenses that support the FTMS
point source should be installed for the FactoryTalk Historian SE server within the
FactoryTalk Administration Console. The FactoryTalk Historian SE patch enables the
FTMS point source support.
Open the FactoryTalk Historian ME web interface in your browser. Click Configure
Historian
and go to the Data Transfer page.
See “Installing FactoryTalk View SE Patch” for more information about patch that
enables FTMS point source support.
datatransfer Trust
webs Trust