Rockwell Automation 1756-HIST2G Historian ME 2.1 - Manual (Page 299)

G • T ROUBLESHOOTING
289
Point Server Issues
This section contains information that may help you troubleshoot FactoryTalk
Historian ME Point Server.
The module starts in
safe mode after a
reboot because the
user accidentally
entered a past time
when configuring the
module time:

The Time Management page will display a warning mes-
sage. Correct the module time configuration on the Time
Management page.

Reboot the module.
For any issue, follow the guidelines provided in the “General Guidelines” section
of this appendix.
Point Server
Symptom Solution
The System Status
section on the Home
page shows that the
Point Server is in
“Error” mode:
This indicates the Point Server is in an undesirable state.
Reboot the module.
Time Management
Symptom Solution