Rockwell Automation 1756-HIST2G Historian ME 2.1 - Manual (Page 233)

B • D ATA T RANSFER S AMPLE S CENARIO
223
7. Click [Ctrl]+ and also select the FactoryTalk Historian SE IP address. The
FactoryTalk Historian ME server: field will be populated with two IP addresses:

One FactoryTalk Historian ME module IP address

One FactoryTalk Historian SE server IP address
8. Click [OK] to save the selection.
9. In the Tag Mask: section, type *mon* and click [Search].
Note that at least two matches appear. One match is from FactoryTalk Historian
ME and one from FactoryTalk Historian SE. The FactoryTalk Historian SE point
name is the module name (0000302E-FTHME) added as a prefix to the front of
the module tag name:
FTHSE_<TagName> = FTHME _<Module_Name>.FTHME _<TagName>
10. Select the MonitorTag from the module.
11. Click [OK] to populate the Trend Add-in Wizard.
12. Repeat steps 4-11 to select the MonitorTag from the FactoryTalk Historian SE
server.